Papers

282 results

  • Advances in Laminated Glass Engineering

    • Paper by Richard Green PE (WA, NY, TX, CO, OR, MT), M.IEAUST CPEng, NER(Aus), APEC Engineer, IntPE(Aus), RBP(Vic), Principal - Owner
    The stability of monolithic glass fins is reasonably well defined; as an elastic material it behaves in a similar manner to other elastic materials…

  • Glass Balustrade Design

    • Paper by Richard Green, PE, SE, P.Eng, CPEng IntPE(Aust), APEC Engineer · Andrew Crosby, PEng · Terrence McDonnell S.E., P.E., P.Eng., SECB

    Glass handrail design in the United States lags behind best practice in other parts of the world. There can be as much as a factor of four (4)

  • The Scope of the Structural Glass Design Manual

    • Paper by Richard Green SE PE P.Eng CPEng · Andrew Crosby P.Eng LEED® AP BD+C · Terrence McDonnell SE SECB PE P.Eng

    The technology of glass now allows glass to be fabricated in sizes and structural configurations not previously conceivable. The standards and codes

  • Glass in GSA Buildings

    • Paper by Georgia Scalfano, Technical Services Sustainability Manager
    Embodied carbon in buildings is a key factor in building decarbonization and while it is generally small compared to operational carbon, the…
  • Architectural Ceramic Assemblies featured image

    Architectural Ceramic Assemblies

    • Paper by Omar Khan, Bill Pottle, Mitchell Bring,
    This paper documents a six year academia/industry collaboration between researchers at the Department of Architecture, University at Buffalo (SUNY)…
  • Building by Numbers featured image

    Building by Numbers

    • Paper by Trevor Stephen Lewis PhD | PE | FRSA, Principal
    This paper outlines the successful implementation of digital workflows between the design team composed of Architect, Structural Engineer and Project…

  • Building Scale Mock-up

    • Paper by Michael Martinez · Asim Tahir

    Until recently, Google has occupied buildings that were designed for others and modified the interiors to suit its needs. Many of the improvements

  • Direct Sun and Occupant Comfort featured image

    Direct Sun and Occupant Comfort

    • Paper by Madeline Gradillas, Henry Richardson,
    Direct sun on the body is a known potential cause of thermal discomfort for occupants, yet most thermal comfort simulations do not capture its…
  • Localized Rigidification of PCM Envelopes featured image

    Localized Rigidification of PCM Envelopes

    • Paper by Elnaz Tafrihi,
    This is an experimental and computational exploration of structural systems that transform between states of rigidity and flexibility. The goal is to…

  • Towards Net Zero Enclosures

    • Paper by Jessica Santonastaso, AIA · Alan Estabrook, AIA

    As architects and designers we understand the urgency of addressing the building sector’s role in the ongoing environmental crisis. Architecture2030

  • BioFacades Classification

    • Paper by Mary Ben Bonham, Kyoung Hee Kim, Professor, Director of IDRL | Founder of EcoClosure Christiane M. Herr, Professor at the School of Design, Southern University of Science and Technology, Shenzhen
    Coauthors: Mary Ben Bonham, Department of Architecture + Interior Design, Miami University, Oxford, OH, USA [corresponding] [presenting at the…

  • Attention to Overheating in Curtainwall Buildings

    • Paper by Yuzhen Zhou NFRC CS, LEED AP, Technical Director at Warmframe Technology
    Several years ago, Technoform and the Solar Energy Research Institute of Singapore (SERIS) researched the thermal performance of different aluminum…
  • Terra Cotta Skins featured image

    Terra Cotta Skins

    • Paper by Laura B. Garofalo, Assistant Professor
    This paper will address the potential of ornamental architectural terracotta surfaces to mitigate the effects of climate fluctuations that will…

  • Insulating Glass Unit Gas Loss

    • Paper by Mark K. Schmidt, M.Eng., S.E., Principal and Unit Manager Stephen M. Morse, PhD, P.E., Assistant Professor
    Concerns over time-dependent argon permeation through the perimeter edge seals of insulating glass units (IGUs) led the authors to utilize two…
  • Fire Safety and Code Challenges for Mass Timber in Curtain Wall Systems featured image

    Fire Safety and Code Challenges for Mass Timber in Curtain Wall Systems

    • Paper by David Barber, Principal John Neary, Senior Associate, Senior Facade Specialist Mic Patterson PhD LEED AP+, Ambassador of Innovation & Collaboration
    With the desire for more sustainable construction and reduced embodied energy, mass timber is being explored for building structures. For medium and…
  • Orbit Tower featured image

    Orbit Tower

    • Paper by Enrica Oliva, Michele Andaloro, Werner Sobek,
    While most of high-rise buildings feature a core surrounded by a spatial frame defining the volume, one could envision a column-free plan where the…
  • CR∆CKİNG THЄ C󉘳DЄ // DYN∆MİC L∆B F∆C∆DЄS featured image

    CR∆CKİNG THЄ C󉘳DЄ // DYN∆MİC L∆B F∆C∆DЄS

    • Paper by Amanda King, AIA, LEED AP BD&C, CPHC, Dayita Kumar, LEED GA, Associate Daniel Nauman, AIA, NCARB, LEED AP, CPHC, Senior Associate
    The real estate market continues to demand “all glass” buildings often to the detriment of human comfort and thermal performance. For an office…
  • The Carbon Footprint of Aluminum Fenestration featured image

    The Carbon Footprint of Aluminum Fenestration

    • Paper by Tom Bougher, Director of Applied Research Richard Braunstein, Vice President of R&D
    The historical focus on reducing the carbon footprint of a building has recently shifted to include more emphasis on embodied carbon, the carbon…
  • In Factory Commissioning featured image

    In Factory Commissioning

    • Paper by Robert Golda,
    Factory inspection visits are vital, yet they unfortunately have a habit of being overlooked. The factory inspection process during the Building…

  • Interstitial condensation risk assessment

    • Paper by Jelle Langmans, Partner at Physibel Piet Houthuys, Senior developer at Physibel Wout Parys, Partner at Physibel Staf Roels, Full professor at KU Leuven
    The development of methods to predict and control moisture accumulation in building envelopes has always been a key element in building science.…