Search

86 results

  • Glazing Design By ASTM E 1300

    • Paper by H. Scott Norville, P.E., Ph.D., F. FTI, F. ASCE, F. ASTM · Stephen M. Morse, P.E., Ph.D., A.M, ASTM · James G. Soules, P.E., S.E., P.Eng., SECB, F. SEI, F. ASCE

    ASTM E 1300 “Standard Practice for Determining Load Resistance of Glass in Buildings” defines the load resistance of a glass construction as being th…

  • City Development and Cladding Design featured image

    City Development and Cladding Design

    • Paper by Hadil Abdallah, Building Sciences Consultant Girma Bitsuamlak, Professor and Canada Research Chair in Wind Engineering at the University of Western Ontario Hamid Vossoughi, PE, P. ENG., Senior Principal

    High-rise buildings in growing cities could become more vulnerable to variations in wind flow due to the continuous changes in urban topology. The ae…

  • Heat-Treated Glass

    • Paper by Reece Poth · Conner Claus

    What was once an accepted reality in heat-treated exterior glass, optical disturbances in glass are under increasing scrutiny by developers, designer…

  • Specifying Commercial Aluminum Finishes

    • Paper by Ben Mitchell, MBA

    Many factors will influence coating selection, but to achieve the desired performance level for a given situation, coatings must be specified based u…

  • More Than a Facade

    • Paper by Edward Losch · Marc Maguire

    In 2014, the American National Standards Institute (ANSI) approved the Precast/Prestressed Concrete Institute (PCI) as an accredited ANSI Standards D…

  • The Seismic Capability of Curtainwalls

    • Paper by Peter Lalas MIEAust CPEng NER APEC Engineer IntPE(Aus)

    The testing of aluminum/glass curtainwalls for seismic capability, mainly inter-story drift, has been carried out on many curtainwalls over the last …

  • The Evolution of AEC Professional Silos

    • Paper by David Olsen, AIA · Megan Leon, P.E. · Christopher Chiuchiolo, LEED AP · Andrea Bono, P.E., LEED AP BD+C · Nick Rustia, P.E. · Diane T Sands, MLIS, MFA, MS-GIST

    Healthcare projects in northern California require specialized knowledge to navigate regulation, technological advancements, and project execution du…

  • Silicone Spandrel Glass Opacifiers

    • Paper by Scott Norville · Samir Blanchet · George Torok · Kris Vockler · John Swanson · Chris Barry · Lawrence Carbary · Stephane Hoffman · Timothy Krytenberg · Chris Fronsoe

    Curtain wall design commonly uses insulating glass units for vision and spandrel glazing to provide better visual harmonization of building facade gl…

  • U-Factor Matters in Hot Climates featured image

    U-Factor Matters in Hot Climates

    • Paper by Helen Sanders, PhD, General Manager

    It is commonly thought that fenestration U-factor is not a key determinant in the performance of facades in hot climates, and generally the focus of …

  • From Design to Experiment

    • Paper by E. Yagdir CELIKER, MSc. · Oguz C. CELIK, PhD.

    Flat cable-net facades are form-active structures which provide maximum transparency by means of point fixing components, tensioned cables, and struc…

  • Carbon Lean Facades featured image

    Carbon Lean Facades

    • Paper by Stefanie Schober, Senior Project Director Jonce Walker, LEED AP, Certified Sustainable Building Advisor, and Fitwel Ambassador, Senior Associate

    With net zero and carbon neutral mandates on the near horizon, New York City has pushed the green building envelope by leveraging incentive-based pro…

  • Passive House Facade Design and Construction

    • Paper by Louis Koehl, AIA, CPHD

    Buildings account for over 40% of global emissions (GlobalABC, 2018). Growing populations and higher standards of living are increasing pressure on t…

  • Combustible Cladding

    • Paper by Juliet Landler

    When it comes to the subject of building enclosure in Australia, one topic has eclipsed all others in recent years: combustible cladding. It has even…

  • Building Innovation 2020: Virtual Edition

    • Event by National Institute of Building Sciences

    There is no other place where everyone who impacts the built environment comes together to find solutions. This year, BI2020 is even bigger. Anyone within the building industry is invited to attend.

  • Translation from Concept to Construction

    • Paper by Ryan Donaghy, AIA · Matthew Spahr, PE

    Fidelity between the built enclosure and early visualizations is rarely, if ever, an accident. When achieved, it comes as the result of persistent ef…

  • The Graduate Building Science program at USC is outstanding. Join us!

    • Article by Douglas E. Noble, PhD, FAIA, Director of the Chase L. Leavitt Graduate Building Science Program, Chair of the Ph.D. Program and Co-Founder of the CLIPPER Lab School of Architecture

    Performance attributes are gradually eclipsing those of appearance as people-centric and zero-impact design comes to dominate practices of buildings and urban habitat. Doug Noble has a message for those interested in preparing for a leadership role in the emerging future of the built environment.

  • Call for Abstracts: Facade Tectonics 2024 World Congress

    • Announcement

    The Facade Tectonics Institute (FTI) announces a call for abstracts for our 2024 World Congress (2024WC) to be convened in Southern California on October 8-10. When it comes to the building facade there is much to talk about.

  • Call for Abstracts: Facade Tectonics 2022 World Congress

    • Announcement

    The Facade Tectonics Institute (FTI) announces a call for abstracts for our 2022 World Congress (2022WC) to be convened in Los Angeles on October 12-13. When it comes to the building facade there is much to talk about. And the Institute is aggressively inclusive, with the mission of bringing all...